This 350 is GM Performance Parts
value-leading crate engine, with 290 horsepower @ 5100 RPM, and 326
ft/lbs of torque @ 3750 RPM on 87 octane fuel. Its power will provide
great durability with a 4-... moreThis 350 is GM Performance Parts
value-leading crate engine, with 290 horsepower @ 5100 RPM, and 326
ft/lbs of torque @ 3750 RPM on 87 octane fuel. Its power will provide
great durability with a 4-bolt mains, PM steel rods, and strong cast
aluminum pistons. The camshaft has .450" intake and .460" exhaust lift
with hydraulic flat tappets. The cast iron cylinder heads have 1.94"
intake and 1.50" exhaust valves with 76 cc combustion chamber.
The 350/290 HP Deluxe combines GMPPs most popular crate engine
with an aluminum intake manifold and chrome dress-up kit to create
one of the most stylish and value-driven engines on the market. The ... moreThe 350/290 HP Deluxe combines GMPPs most popular crate engine
with an aluminum intake manifold and chrome dress-up kit to create
one of the most stylish and value-driven engines on the market. The
chrome dress-up parts include the valve covers (with push-in breathers
and T-bar-style hold-downs), timing cover and air cleaner.
For customers in search of a
replacement Partial engine for
their ZZ-series engine, this is it! It
includes the ZZ4 350s bottom end,
with forged steel crankshaft, LT1-
style high-silicon aluminum pistons
and connecting rods.
For customers in search of a
replacement Partial engine for
their ZZ-series engine, this is it! It
includes the ZZ4 350s bottom end,
with forged steel crankshaft, LT1-
style high-silicon aluminum pistons
and connecting rods.
GMPPs most economical Circle Track Crate Engine
GM Performance Parts CT350 delivers 350 horsepower from a classic
350 cubic-inch combination. Its just the thing budget-conscious racers can
depend o... moreGMPPs most economical Circle Track Crate Engine
GM Performance Parts CT350 delivers 350 horsepower from a classic
350 cubic-inch combination. Its just the thing budget-conscious racers can
depend on for competitive performance and low-maintenance durability.
The CT350 is based on the popular 350 HO high-performance street
crate engine, including a stout four-bolt-main block and Vortec-style iron
cylinder heads. The Vortec heads and unique dual-pattern camshaft help
deliver more than 300 lb.-ft. of torque at 2,000 rpm and hold it above
that mark through 5,500 rpm it peaks at 390 lb.-ft. at 3,800 rpm. With
that much pulling power, you can hold a gear longer, keeping the engine
in its sweet spot for quicker laps.
We complete the CT350 with an 8-quart circle track racing oil pan,
balancer, HEI distributor and an aluminum high-rise, dual-plane intake
manifold. Add your carburetor, starter, spark plugs, wires and water
pump all available at gmperformanceparts.com and youll be ready to
roll into the winners circle!
- 350 HP @ 5000 RPM
- 390 ft/lbs TQ @ 3800 RPM
- 9.1:1 Compression Ratio
- Cast Iron Four-Bolt Main Block with 1-Piece Rear Main Seal
- Nodular Cast Iron Crankshaft
Based on the tough, proven, and dependable 5.3L engine, it\'s the same long-lived production engine that you\'ll find in our award winning full-sized truck and SUV line. The stock 5.3 offers a dependa... moreBased on the tough, proven, and dependable 5.3L engine, it's the same long-lived production engine that you'll find in our award winning full-sized truck and SUV line. The stock 5.3 offers a dependable 295 horsepower and 325 lb.-ft. of torque from the 96mm bore by 92mm stroke engine design.
What makes the 5.3 High Output crate engine so special is that the GM engineers have added a GM Performance Parts custom cam and Grafal-coated pistons. With these simple upgrades, the 5.3 HO kicks out 332 horsepower and 352 lb.-ft. of torque. And, just like the stock 5.3, the 5.3 HO is capable of thousands of miles of dependable service while returning outstanding fuel mileage, thanks to the superior design of the LS Family of engines.
Displacement: 327
For those who want to build their own custom stroker small-block engine, this partial engine comes with the specially modified block, 3.80 4340 forged steel stroker crankshaft, heavy-duty connecting r... moreFor those who want to build their own custom stroker small-block engine, this partial engine comes with the specially modified block, 3.80 4340 forged steel stroker crankshaft, heavy-duty connecting rods, hyper-eutectic pistons, bearings, oil pan, oil pump, front cover, balancer, and 12.75 flexplate. This partial engine does not include a camshaft, lifters, timing chain, or cam sprocket. The oil pan is assembled loosely on the block so it can be disassembled without destroying the pan gasket.
This is the same shortblock that GM uses for the 383/340 hp and the 383/425 hp Crate engines.
- Block: Cast Iron, 4 bolt main, with 1 piece rear main seal
- Crankshaft: Forged 4340 Steel, Externally Balanced
- Connecting Rods: Powdered metal
- Pistons: Hypereutectic, dished top, with offset pins
- 8" Harmonic balancer
- 12-3/4" automatic flexplate
Starting with the 350 HO Base, it also has a Holley 600 cfm vacuum secondary carburetor, aluminum dual plane intake manifold, GM HEI distributor, water pump, torsional damper, and a flexplate for auto... moreStarting with the 350 HO Base, it also has a Holley 600 cfm vacuum secondary carburetor, aluminum dual plane intake manifold, GM HEI distributor, water pump, torsional damper, and a flexplate for automatic transmissions. It eliminates the guesswork.
- 330 HP @ 5000 RPM
- 380 ft/lbs torque @ 3800 RPM (Max Recommended RPM: 5500)
- 9.1:1 Compression Ratio
- Cast Iron 4-Bolt Block with One-Piece Rear Main Seal
- Nodular Cast Iron Crankshaft
- Cast Aluminum Pistons
This GM Performance big block 454 HO is an awesome value, ready for an easy transplant into your classic muscle car or street rod! It is a Gen VI-based block with a conventional-style mechanical fuel ... moreThis GM Performance big block 454 HO is an awesome value, ready for an easy transplant into your classic muscle car or street rod! It is a Gen VI-based block with a conventional-style mechanical fuel pump boss, and it sounds much like the performance big blocks of the 1960s. The engine has a windage tray, one-piece rear main seal, and high-speed single roller timing chain. An 8.75:1 compression ratio means you've got an engine that's satisfied on today's premium fuel with no appetite for lead, octane boosters, or other fuel additives.
The sturdy foundation of the 454 HO
is the starting point of a custom en-
gine build. Use externally balanced
flywheel for manual transmission
applications.
If you want the strength and convenience of the 454 HO bottom end,
but want to add your own heads and induction system, use our 454
Partial engine P/N 12498778.
The LS327 is offered in Deluxe form that includes everything
from a carbureted intake to the ignition coils, coil brackets,
shields, plug wires, gaskets and installation hardware. The
manifold is... moreThe LS327 is offered in Deluxe form that includes everything
from a carbureted intake to the ignition coils, coil brackets,
shields, plug wires, gaskets and installation hardware. The
manifold is GMPPs aluminum, spider-type intake thats optimized for the LS327s cathedral-port heads.
Its extra displacement and unique parts are designed to build a wide,
flat torque curve that hits the 400 lb.-ft. mark by 2,500 rpm and doesnt
dip below it through the 4,000 rpm peak (435 lb.-ft.). ... moreIts extra displacement and unique parts are designed to build a wide,
flat torque curve that hits the 400 lb.-ft. mark by 2,500 rpm and doesnt
dip below it through the 4,000 rpm peak (435 lb.-ft.). It also makes 340
horsepower. Thats power and torque you simply wont get with a stock-
type rebuild.
The HT383 features a brand-new engine block with four-bolt mains
an upgrade for most production engines that came with two-bolt
mains along with a forged steel crankshaft and a smooth hydraulic
roller camshaft. Its 9.1:1 compression ratio allows it to run on regular
unleaded gasoline, too.
The HT383E crate engine from GM Performance Parts is an exciting new extension of our \"High Torque\" line that is especially designed for your 1996-1999 full-sized GM pickup trucks and SUVs. The HT38... moreThe HT383E crate engine from GM Performance Parts is an exciting new extension of our "High Torque" line that is especially designed for your 1996-1999 full-sized GM pickup trucks and SUVs. The HT383E is a direct replacement for your high-mileage 5.7L stock engine
The HT383E offers you the same brute strength of our HT383: forged steel crank, 4-bolt main cast iron block, and a camshaft design for towing and hard work. With 383 cubic inches, you also get a broad torque band that peaks at 3600 rpm with horsepower peaking at 4500 rpm.
GM Performance Parts engineers designed the HT383E so that installation is as easy as possible. Simply swap your new HT383E in place of your existing 5.7L engine using your stock intake manifold, wiring harness, and fuel injection system. The stock computer adapts to the new HT383E, and you suddenly have a stump-pulling, big-inch small-block at your disposal.
- 340 Hp @ 4500 rpm
- 435 ft/lbs TQ @ 4000 rpm
- Block: Cast Iron with 4-bolt main caps
- Crankshaft: Forged Steel
The versatile ZZ4 350 adapted for Circle Track competition!
Renowned for its deep reserve of torque, responsive power and great
dependability, the ZZ4 350 crate-engine is one of GM Performance
Part... moreThe versatile ZZ4 350 adapted for Circle Track competition!
Renowned for its deep reserve of torque, responsive power and great
dependability, the ZZ4 350 crate-engine is one of GM Performance
Parts most popular crate engines and our engineers have adapted
that combination as a winning, affordable racing engine in the CT355!
The CT355s strength lies in its ZZ4 bottom end, which includes a block
with four-bolt mains, a forged-steel crankshaft and high-silicon pistons.
A steel hydraulic roller camshaft actuates valves in the high-flow
aluminum ZZ4 heads, which boast 163cc intake ports and 1.94/1.50-inch
valves. This combination makes good power and great torque: 355 hp
and 405 lb.-ft.
Like our other Circle Track crate engines, the CT355 includes a racing oil
pan with a dual kick-out design. It also includes a valve cover breather
kit, a special kool nut rocker arm nut design, a dual-plane aluminum
high-rise intake manifold, cast iron water pump, HEI distributor and
balancer. You add the carburetor, starter, spark plugs and wires all
available from gmperformanceparts.com.
355 HP @ 5250 RPM
405 ft/lbs TQ @ 3500 RPM
10:1 Compression Ratio
Cast Iron 4-Bolt Main Block with 1-Piece Rear Main Seal
1053 Forged Steel Crankshaft
You won\'t go broke finishing off your project car with our 350 HO
Turn-Key crate engine! It\'s packed with all the features you need to get
a reliable 330 horsepower and 380 lb.-ft. of torque from ... moreYou won't go broke finishing off your project car with our 350 HO
Turn-Key crate engine! It's packed with all the features you need to get
a reliable 330 horsepower and 380 lb.-ft. of torque from a dependable,
time-tested combination of GM Performance Parts. Of course, all the
components used in this engine are brand new-not remanufactured parts
like the competition is trying to sell you. Designed by our in-house
engineers to give you maximum return for your hot rod dollar, the 350 HO
Turn-Key is a great choice for your small-block crate engine needs.
The 350 HO is based on a tough, Chevy four-bolt block that holds a
strong nodular iron crankshaft, good rods, and aluminum pistons. The
high-lift camshaft gives the engine its own unique, aggressive idle. The
cam is based on the same one found in 1965-67 Corvette 327 engines, but
it has even more lift and duration.
This brand new partial engine includes the
forged reciprocating components, as well as the balancer, oil pan and
timing chain set. Just add GMPP or your custom cylinder heads, intake,
carburetor an... moreThis brand new partial engine includes the
forged reciprocating components, as well as the balancer, oil pan and
timing chain set. Just add GMPP or your custom cylinder heads, intake,
carburetor and ignition system to complete. This partial engine comes
with camshaft P/N 809-12366543, but must be changed to camshaft P/N
809-12552296 to match HT502 specifications. Use externally balanced
flywheel or flexplate.
As far as crate engines go, this one is a winner. The ZZ4 350 Turn-Key crate engine has been one of most popular high performance crate engines since the start of GM Performance Parts. Its legendary s... moreAs far as crate engines go, this one is a winner. The ZZ4 350 Turn-Key crate engine has been one of most popular high performance crate engines since the start of GM Performance Parts. Its legendary status is based on an incredible performance level that is stone cold reliable. They've packed the ZZ4 350 crate engine with a forged steel crankshaft. hypereutectic pistons, hydraulic roller camshaft and lifters, and aluminum cylinder heads. The ZZ4's Corvette-derived high-performance heads feature high velocity intake runners and D-shaped exhaust ports to promote efficient and unobstructed flow through the engine providing strong power and torque at all RPM levels.
The ZZ4 350 is delivered with an aluminum dual-plane intake manifold, HEI distributor, cast iron water pump, damper, and flexplate. The Turn-Key ZZ4 350 crate engine also ships with all the parts you need to get it running. That includes an accessory drive package, fuel pump, chrome air cleaner kit, Holley 750-cfm carburetor, starter, and spark plug wires.
Known as the LS Family V-8 small-block, the first and most popular version is the high-performance LS1-available here as a complete crate engine from GM Performance Parts.
In many ways, the LS1 is su... moreKnown as the LS Family V-8 small-block, the first and most popular version is the high-performance LS1-available here as a complete crate engine from GM Performance Parts.
In many ways, the LS1 is superior to any small-block that came before it. A deep-skirt, six-bolt-main block, with structural oil pan and other carefully engineered features, helps make the LS1 a strong, smooth running and dependable engine. A highlift camshaft actuating big 2.00/1.55 valves in symmetrical-port cylinder heads helps make it a uncompromised performer.
The engine includes a GTO-style oil pan, electronic drive-bywire throttle body, intake manifold, exhaust manifolds, fuel rail with injectors, balancer, and 14" automatic transmission flexplate. It makes a great performance engine for your performance vehicle project-just add your wiring and electronics.
- Horsepower: 350 @ 5800 Rpm
- Torque: 365 @ 4000 Rpm
- Bore & Stroke: 3.90" x 3.62"
- Block: Cast Aluminum with 6-bolt cross-drilled iron main caps
- Crankshaft: Nodular Iron
- Connecting Rods: Powdered Metal Steel
- Pistons: Hypereutectic Aluminum
This GM Performance engine uses the ZZ4 short block and adds to it the Fast Burn cylinder heads for 385 horsepower. The Fast Burn uses stamped steel 1.5 rocker arms and the same camshaft as the ZZ4, b... moreThis GM Performance engine uses the ZZ4 short block and adds to it the Fast Burn cylinder heads for 385 horsepower. The Fast Burn uses stamped steel 1.5 rocker arms and the same camshaft as the ZZ4, but these heads are hungry for more. The Fast Burn is an excellent choice for the basis of a custom engine. Its forged steel crankshaft and forged PM connecting rods are proven to 500 horsepower.
- 385 HP @ 5600 RPM
- 385 ft/lbs TQ @ 4000 RPM (Max Recommended RPM: 5800)
- 9.6:1 Compression Ratio
- Cast Iron 4-Bolt Block with One-Piece Rear Main Seal
- Forged Steel Crankshaft
- High Silicon Aluminum Pistons w/Offset Pins
The ZZ383 delivers Big-Block power with Small-Block efficiency. We use
the sturdy 383 bottom end, including a brand-new block with four-bolt
mains; a forged crankshaft and heavy-duty rods, and finish it off with Fast
Burn cylinder heads to enable 425 horsepower and 449 lb.-ft. of torque.
The ZZ383 delivers Big-Block power with Small-Block efficiency. We use
the sturdy 383 bottom end, including a brand-new block with four-bolt
mains; a forged crankshaft and heavy-duty rods, and finish it off with Fast
Burn cylinder heads to enable 425 horsepower and 449 lb.-ft. of torque.
GM Performance Part\'s Fast Burn cylinder heads are the fast way to the winner\'s circle and they\'re standard on the 350/400 Late Model GM racing engine from GM Performance Parts. This brand-new, fac... moreGM Performance Part's Fast Burn cylinder heads are the fast way to the winner's circle and they're standard on the 350/400 Late Model GM racing engine from GM Performance Parts. This brand-new, factory-sealed racing engine is based on the popular Fast Burn 385-horsepower street crate engine, but includes a racing only 8-quart circle track oil pan, with dual kick-out design, along with a valve cover breather kit and special "kool nut" rocker arm design. The assembly also includes an open-plenum high-rise intake manifold and 1.5:1-ratio aluminum roller rockers. Because it's based on the 350 Fast Burn engine, the 350/400 racing engine includes a bulletproof bottom end, anchored by a forged steel crankshaft and hypereutectic pistons. The 23 degree, Fast Burn aluminum heads enable tremendous power in the small-block V-8 because of a unique chamber design that quickly and completely burns all of the air/fuel mixture giving you maximum power all the time.
400 HP @ 5500 RPM
400 ft/lbs TQ @ 4500 RPM
Compression Ratio: 9.6:1
Bore/Stroke: 4.000"/3.480"
Cast iron 4-bolt main with 1-piece rear main seal
Forged 1053 Steel Crankshaft
5.7" Steel Connecting Rods
Hypereutectic Aluminum Pistons
We deliver the Ram Jet 350 with the following components to make it
easier to install and start:
Unique intake manifold and plenum that is 9.75 inches tall
plenty of clearance to fit under the... moreWe deliver the Ram Jet 350 with the following components to make it
easier to install and start:
Unique intake manifold and plenum that is 9.75 inches tall
plenty of clearance to fit under the hood of most vehicles
without modifications
MEFI 4 engine controller
Wiring harness
Detailed instructions
The bottom end of the engine is our stout 350 with a brand-new block,
a hydraulic roller cam, Vortec iron heads and a pump-gas-friendly 9.4:1
compression ratio.
- 350 HP @ 5200 RPM
- 400 ft/lbs torque @ 3500 RPM
- 9.4:1 compression ratio
- Cast iron 2-bolt main block
- Cast iron crankshaft
GMPPs most economical Big-Block crate engine delivers 500 lb.-ft.!
GM Performance Parts 454 HO crate engine is classic in its own
time, offering enthusiasts an affordable Big-Block combination wit... moreGMPPs most economical Big-Block crate engine delivers 500 lb.-ft.!
GM Performance Parts 454 HO crate engine is classic in its own
time, offering enthusiasts an affordable Big-Block combination with
performance specs that will make you think its 1970 all over again
with 425 horsepower and 500 asphalt-wrinkling lb.-ft. of torque.
The foundation of the 454 HO is a brand-new, updated cylinder
block, which incorporates many strength and performance design
enhancements making it a smart and economical alternative to
rebuilding. We also add an all-forged reciprocating assembly for
maximum durability, a roller camshaft and a set of rectangular-port
iron cylinder heads.
We deliver the 454 HO with a water pump, balancer, 14-inch flexplate
and aluminum intake manifold. Add a carburetor, ignition system
and starter and your budget Big-Block will be ready to roar. All of the
necessary parts are available from GMPP.
The Fast Burn 385 uses the proven ZZ4 short block and adds to it the Fast Burn aluminum cylinder heads for 385 horsepower. With value in mind, the Fast Burn 385 uses stamped steel rocker arms and the ... moreThe Fast Burn 385 uses the proven ZZ4 short block and adds to it the Fast Burn aluminum cylinder heads for 385 horsepower. With value in mind, the Fast Burn 385 uses stamped steel rocker arms and the same ZZ4 camshaft that powers thousands of hot rods. This engine is an excellent choice for the basis of a custom engine. Its strong forged steel crankshaft and forged powdered metal connecting rods are proven to 500 horsepower.
Our engineers grafted the bottom end of the legendary ZZ4 with the
horsepower-building Fast Burn cylinder heads to create the Fast Burn
385. The result is 385 horsepower and a satisfying 385 lb.-ft. of torque
with no less than 300 lb.-ft. from 1,500 rpm to 5,700 rpm.
The foundation is a sturdy iron block with four-bolt mains, a forged steel
crankshaft, an aggressive hydraulic roller camshaft and durable high-
silicon pistons. As a Turn-Key crate engine, it comes with the distributor,
carburetor and balancer installed along with a starter, fuel pump, air
conditioning pump, alternator, front-end accessory drive kit and more
all in one convenient, all-inclusive package!
GM has taken the heavy duty LSX block and combined it with the
production LS3 components. This includes the High flow LS3 heads and an
upgraded forged dished piston to keep the compression at 9.0 /1... moreGM has taken the heavy duty LSX block and combined it with the
production LS3 components. This includes the High flow LS3 heads and an
upgraded forged dished piston to keep the compression at 9.0 /1. This
combination creates a high-revving LSX376 crate engine that runs on pump
gas, A unique platform for any project.
The engine delivers exceptional air flow capability in a straight
forward packaging even without any power-adder. The LSX376 is built
without an intake manifold so you can top it with a carburetor or
production-style injection system.
The LSX376 comes with only a dust cover instead of an oil pan so you can
order what is correct to your application. Just one more way to keep
the costs down and not include parts you can't use.
Specs:
450hp / 444 lb-ft torque
Bore x Stroke 4.065" X 3.622"
9.0 / 1 Compression
LSX Iron Block #19213964
Camshaft - 204/211 Duration .551"/.522 Lift Hyd Roller
LS3 production Heads
The key to towing performance is torque, and the 502 HT has it way down low where it\'s needed most.
With 512 ft/lbs of torque at an incredibly low 3300 RPM and 377 horsepower at 4500 RPM, the 502 HT... moreThe key to towing performance is torque, and the 502 HT has it way down low where it's needed most.
With 512 ft/lbs of torque at an incredibly low 3300 RPM and 377 horsepower at 4500 RPM, the 502 HT crate engine will help your vehicle climb hills, accelerate onto highways, and pass with confidence. The engine includes oil pan, valvetrain, valve covers, timing set, balancer, and externally-balanced 14" automatic transmission flexplate. For manual transmissions, use externally-balanced flywheel (#809-14096987) and 11" clutch assembly.
Technical Specifications
Horsepower 377 @ 4500 RPM
Torque 512 ft/lbs @ 3300 RPM
Compression Ratio 8.75:1
Block Gen VI Cast Iron
Crankshaft Forged 1053 Steel
Recommended Fuel: 92 octane
Direct from the corvette to your project vehicle!
The LS3 6.2L is the 430-hp standard engine in the Chevrolet Corvette
and is a fantastic combination of high-technology and uncompromising
performan... moreDirect from the corvette to your project vehicle!
The LS3 6.2L is the 430-hp standard engine in the Chevrolet Corvette
and is a fantastic combination of high-technology and uncompromising
performance. Our LS3 crate engine comes complete, from the
Corvette-specific oil pan to the ignition system. It also includes the
EFI intake manifold assembly with injectors and throttle body, exhaust
manifolds, water pump, balancer, 58X reluctor wheel and 14-inch
automatic-transmission flexplate.
Inside, the LS3 is filled with components designed for high performance
and longevity. The aluminum block is filled with a sturdy reciprocating
assembly that combines with L92-type rectangular-port heads to
deliver a 10.7:1 compression ratio. A high-lift, hydraulic roller camshaft
delivers a whopping 0.551-inch of lift on the 2.16-inch intake valves
and 0.522-inch lift on the 1.59-inch exhaust valves, enhancing the LS3s
tremendous airflow and broad torque curve.
An aluminum-headed 440-horse monster in a box!
If you\'re going to put a big block in your project car, why not add some aluminum heads into the mix? GM Performance Parts took the venerable 454 HO, s... moreAn aluminum-headed 440-horse monster in a box!
If you're going to put a big block in your project car, why not add some aluminum heads into the mix? GM Performance Parts took the venerable 454 HO, swapped the cast iron production heads for a set of oval-port aluminum castings, ands created the ZZ454. Not only do the aluminum cylinder heads flow more air, but you also drop almost 100 pounds off the nose of your car - dramatically improving performance.
The aluminum heads of the ZZ454/440 account for 15 horse improvement over the iron-headed 454 HO. These oval-port aluminum heads use huge 2.25" intake and 1.88" exhaust valves as well as small combustion chambers to add to the efficiency of the 454" big-block. The bottom end includes a Gen VI four-bolt, a forged steel crank, forged connecting rods, and forged pistons. A roller camshaft with a .510/.540" lift specs deliver a big-block loping idle as well as add to the high performance punch of the entire crate engine.
The ZZ454/440 is delivered as a complete assembly including water pump, balancer, intake manifold, and 14" automatic transmission flexplate. All you need to do is add your carburetor, ignition, and starter to complete the project.
Affordable Big-Block performance with huge torque and 450 hp!
With 450 horsepower and 550 lb.-ft. of torque, our 502 HO crate engine
has power on tap for every need whether its a 69 Chevelle at the... moreAffordable Big-Block performance with huge torque and 450 hp!
With 450 horsepower and 550 lb.-ft. of torque, our 502 HO crate engine
has power on tap for every need whether its a 69 Chevelle at the
drag strip or the Suburban that towed it there!
The 502 HO is all about torque. It hovers just below the 500 lb.-ft. mark
at only 1,500 rpm and arcs gently above the 500 lb.-ft. level by 2,800
rpm, remaining there through 4,200 rpm. All those axle-twisting lb.-ft.
are rooted in a stronger, updated four-bolt cylinder block that houses
a forged steel crankshaft, forged and shot-peened rods and forged
aluminum pistons. In other words, its a super-stout assembly that is
as durable as it is powerful.
Iron, rectangular-port cylinder heads keep the 502 HO affordable
and our crate engine assembly includes an aluminum, dual-plane
intake manifold, a water pump, 14-inch flexplate, balancer and more.
You add the carburetor, starter and ignition system all available at
gmperformanceparts.com.
The LS 376/480 comes with the same great features as the LS3 crate engine. The bottom end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high... moreThe LS 376/480 comes with the same great features as the LS3 crate engine. The bottom end includes a 6-bolt aluminum block, nodular crank, high performance rods, and 10.7:1 pistons. The heads are high-flowing rectangular-port units that share their design with the amazing LS7. The same EFI intake manifold feeds the hungry engine, while 1.7:1 roller rockers work with the upgraded camshaft.
The GM Performance Parts engineers picked the LS Hot Cam (p/n 809-88958733) to take the LS3 to the next level. This cam specs out with .525-inch intake and exhaust valve lift. Duration (@ .050 inches) is 219° intake and 228° exhaust. This cam allows for a dramatic increase in power across the power band while still maintaining good street manners. The engine will idle and cruise just like an LS3, but the power increase is there whenever you need it.
With all of the same great components as the LS3, but with an additional 50 horsepower, the new LS 376/480 is ready, willing, and able to answer your call for a new LS crate engine.
Nothing is quite as satisfying as building your
own high-performance big-block. That\'s why GM Performance Parts offers
the entire ZZ502 engine as a kit. Every past is engineered to work
together t... moreNothing is quite as satisfying as building your
own high-performance big-block. That's why GM Performance Parts offers
the entire ZZ502 engine as a kit. Every past is engineered to work
together to deliver 502 horses! Kit includes aluminum oval-port heads,
forged steel crank and rods, and forged aluminum pistons. It also
includes a hydraulic roller cam, valve train and valve covers. All you
will need to add is an intake manifold, carburetor, water pump,
distributor and spark plug wires.
The LS376 with a race-proven camshaft helps build huge power
in this carbureted combo!
By combining traditional carbureted aspiration with the high-tech
attributesof the LS platform, weve developed ... moreThe LS376 with a race-proven camshaft helps build huge power
in this carbureted combo!
By combining traditional carbureted aspiration with the high-tech
attributesof the LS platform, weve developed the ultimate modern engine
for your vintage car or truckor race car.
Its the LS376/515!
With the LS3 engine as its foundation, the LS376/515 crate engine uses
the regular-production bottom end, including an aluminum block with
six-bolt cross-bolted main caps, a Corvette oil pan and LS3 cylinder
heads with high-flow, rectangular-port intake passages. To that, we swap
the fuel injection system for a high-rise intake manifold of our own
design, a 770-cfm carburetor (sold separately) and our race-tested ASA
Hot Cam, P/N 12480110.
The new combination is worth 515 horsepower at a stellar 6500 rpm and
469 lb-ft of grin-inducing torque at 5000 rpm. Compared to the
regular-production LS3 and even our LS3-based LS376/480 crate engine,
the ASA Hot Cam gives this combination much more camshaft duration to
hold open the valves longer. Its a horsepower-building camshaft
designed for the wide-open, high-rpm world of circle track racing and it
means big power for this great crate enginewhether its used on the
street or track.
GMPPs exclusive Ls3-based racing engine is a lightweight powerhouse!
GM Performance Parts CT525 6.2L crate engine is based on the latest-
generation LS engine family and delivers serious power for se... moreGMPPs exclusive Ls3-based racing engine is a lightweight powerhouse!
GM Performance Parts CT525 6.2L crate engine is based on the latest-
generation LS engine family and delivers serious power for serious
racing series, including Super Late Model and similar. It is rated at 525
hp and 471 lb.-ft. of torque!
This 6.2L engine is similar to the LS3 V-8 that is standard in the
Chevrolet Corvette, but weve adapted it to Circle Track racing with a
carburetor intake manifold, 8-quart racing oil pan and more. The engine
is lightweight and strong, using an aluminum block with cross-bolted
6-bolt main caps and high-flow LS3 rectangular-port cylinder heads.
The CT525 6.2L comes with coil-on-plug ignition, a water pump,
exhaust manifolds and an SFI-certified balancer. It also comes with a
14-inch/168-tooth automatic transmission flexplate. All thats needed
to complete the assembly is a carburetor, starter and our LSX ignition
controller P/N 19171130. All the necessary parts are available online at
gmperformanceparts.com.
The DIY foundation for big torque!
Its simple: We offer the ZZ502/502 Base crate engine for the builder
who wants the super-strong bottom end and high-flow aluminum
oval-port cylinder heads, but ... moreThe DIY foundation for big torque!
Its simple: We offer the ZZ502/502 Base crate engine for the builder
who wants the super-strong bottom end and high-flow aluminum
oval-port cylinder heads, but also wants to finish the engine their way.
The ZZ502/502 Base Engine uses our new cylinder block casting that is
stronger and better suited to high-performance combinations. A forged
steel crankshaft, forged rods and forged pistons form the reciprocating
assembly, with a smooth-operating hydraulic roller camshaft delivering
big 0.527/0.544-inch lift. The lightweight aluminum heads boast 110cc
combustion chambers and big, 2.25-inch intake and 1.88-inch
exhaust valves.
We rate the ZZ502/502 Base engine at 502 horsepower and 567 lb.-ft.
of torque when it is finished with GMPP aluminum intake manifold P/N
12363406 and Holley 870-cfm carburetor P/N 19170094. The other parts
you need to complete the engine including chrome dress-up parts
are available from your GMPP dealer and gmperformanceparts.com.
The ZZ502/502 Base is a great foundation. Its up to you to make the
most of it.
GM Performance has worked closely with the California Air Resources
Board (CARB) to secure emissions approval for these high-horsepower,
high performance engines. These GM Performance LS3 6.2L E-Rod... moreGM Performance has worked closely with the California Air Resources
Board (CARB) to secure emissions approval for these high-horsepower,
high performance engines. These GM Performance LS3 6.2L E-Rod crate
engines are the first crate engines of their kind to be certified
50-state emissions compliant. With their stunning combination of
horsepower and efficiency, these GM Performance LS3 E-Rod crate engines
are perfect for the race track or just cruising around town in your
street rod or musclecar.
Features include:
* 6.2L LS3 engine with 430 hp and 424 ft.-lbs. of torque
* Engine wiring harness
* Engine control module with emissions-legal calibration
* Catalytic converters
* Exhaust manifolds
* Oxygen sensors and sensor bosses
* Fuel tank evaporative emissions canister
* Air filter
* MAF sensor
* Accelerator pedal
6.2L LS3 production crate engine rated at 430hp and 424lb-ft of torque.
The king of all big block crate engines is the ZZ502. It\'s as close as you\'ll get to a custom-built 502 at a crate engine price. With heavy-duty components, the ZZ502\'s power and durability are ens... moreThe king of all big block crate engines is the ZZ502. It's as close as you'll get to a custom-built 502 at a crate engine price. With heavy-duty components, the ZZ502's power and durability are ensured.
502 HP @ 5200 RPM
567 ft/lbs TQ @ 4200 RPM (Max Recommended RPM: 5800)
Compression Ratio: 9.6:1
Cast Iron 4-Bolt Main Block
1053 Forged Steel Crankshaft
Forged Aluminum Pistons
4340 Forged Steel Shot-Peened Connecting Rods with 7/16" Bolts
The king of all big block crate engines is the ZZ502. It\'s as close as you\'ll get to a custom-built 502 at a crate engine price. With heavy-duty components, the ZZ502\'s power and durability are ens... moreThe king of all big block crate engines is the ZZ502. It's as close as you'll get to a custom-built 502 at a crate engine price. With heavy-duty components, the ZZ502's power and durability are ensured.
502 HP @ 5200 RPM
567 ft/lbs TQ @ 4200 RPM (Max Recommended RPM: 5800)
Compression Ratio: 9.6:1
Cast Iron 4-Bolt Main Block
1053 Forged Steel Crankshaft
Forged Aluminum Pistons
4340 Forged Steel Shot-Peened Connecting Rods with 7/16" Bolts
The classic L88 427 updated for the 21st century!
Between 1967 and 1969, the legendary L88 was the ultimate expression
of Chevys Big-Block power, combining a rigid iron cylinder block with
lightwei... moreThe classic L88 427 updated for the 21st century!
Between 1967 and 1969, the legendary L88 was the ultimate expression
of Chevys Big-Block power, combining a rigid iron cylinder block with
lightweight aluminum cylinder heads and a single four-barrel carburetor.
That raspy rat engine was rated at 480 horsepower, although the figure
was generally thought to be on the conservative side.
GM Performance Parts has recreated that classic Big-Block combination
in the ZZ427/480 including the 480 horsepower rating (and it just might
be a little on the conservative side, too). Like the original, it features a
forged steel crankshaft and high-flow, oval-port aluminum cylinder heads.
Weve upgraded the camshaft from the originals mechanical flat-tappet
design to a smoother hydraulic roller, which delivers great drivability
characteristics and a broader rev range. A 10.1:1 compression ratio
means it will perform great on pump gas, too.
Whether youre building a 69 COPO Camaro resto-mod tribute, a
modified mid-year Corvette or a street-tire class winner, the ZZ427/480 is
the heritage-inspired crate engine that delivers the performance that built
the Big-Blocks legendary reputation.
Big-Block performance built from our tall-deck LSX block!
One of the most legendary engines in muscle car history was the
Chevy 454 Big-Block. With the tall-deck LSX Bowtie block, GM
Performance Pa... moreBig-Block performance built from our tall-deck LSX block!
One of the most legendary engines in muscle car history was the
Chevy 454 Big-Block. With the tall-deck LSX Bowtie block, GM
Performance Parts engineers were able to build a 21st-century 454 with
the latest technology and it requires no more space under the hood
than a production LS engine.
The LSX454 is filled with an all-forged, super-tough rotating assembly
and features a pair of our new, deep-breathing LSX six-bolt cylinder
heads. It also comes dressed with great-looking, orange powder-coated
valve covers with engraved LSX454 logos.
GMPP delivers the LSX454 without an intake manifold and other
accessories. With a carburetor and high-flow GM Performance Parts
intake manifold, the LSX454 is good for about 620 horsepower and
600 lb.-ft. of torque or about 580 hp and 600 lb.-ft. with fuel injection.
Outrageous style and fuel-injected drivability all with Big-Block power!
The Ram Jet 502 blends the legendary torque and performance of the
Big-Block with a modern port fuel injection system and tu... moreOutrageous style and fuel-injected drivability all with Big-Block power!
The Ram Jet 502 blends the legendary torque and performance of the
Big-Block with a modern port fuel injection system and tunnel ram-style
high-rise intake manifold. Its a combination that offers uncompromising
performance in a visually stunning presentation.
The unique Ram Jet fuel injection system stands 11 inches tall at its
highest point and consists of a two-piece manifold/plenum assembly,
eight injectors, a throttle body, and an updated MEFI 4 controller. Setup
instructions are included, making it a simple, plug-and-play installation.
Supporting the unique induction system is a robust bottom end with
an all-forged rotating assembly and a smooth hydraulic roller camshaft.
The heads are GMPPs high-flow aluminum oval-port parts.
Youll need to check your ride for clearance before closing the hood over
the Ram Jet 502. Then again, it looks so impressive, you may just want
to cruise around with the hood off!
The most powerful Big-Block street engine from GMPP!
The ZZ572/620 is the ultimate expression of GM Performance Parts
engineering capability.
We build the ZZ572 with huge 4.560-inch bores and add a... moreThe most powerful Big-Block street engine from GMPP!
The ZZ572/620 is the ultimate expression of GM Performance Parts
engineering capability.
We build the ZZ572 with huge 4.560-inch bores and add a forged
4.375-inch-stroke crankshaft. To make sure those cylinders are packed
with every cubic centimeters worth of atmosphere, we use a camshaft
with incredible 0.632/0.632-inch lift and 254°/264° duration specifications.
For the builder who wants the foundation of this Big-Block powerhouse,
but wants to finish it with the induction system of his choice, we offer
the ZZ572/620 Base engine P/N12498792. It comes with the bottom
end fully assembled including the forged crankshaft, rods and pistons
along with the unique 0.632-inch-lift roller camshaft.
GM Performance Parts offers the
racing-oriented ZZ572/720R in Base
Engine form, allowing the builder to
order the long-block assembly and add
the induction system, ignition system
and other accessories separately.
GM Performance Parts offers the
racing-oriented ZZ572/720R in Base
Engine form, allowing the builder to
order the long-block assembly and add
the induction system, ignition system
and other accessories separately.
The most powerful Big-Block street engine from GMPP!
The ZZ572/620 is the ultimate expression of GM Performance Parts
engineering capability.
We build the ZZ572 with huge 4.560-inch bores and add a... moreThe most powerful Big-Block street engine from GMPP!
The ZZ572/620 is the ultimate expression of GM Performance Parts
engineering capability.
We build the ZZ572 with huge 4.560-inch bores and add a forged
4.375-inch-stroke crankshaft. To make sure those cylinders are packed
with every cubic centimeters worth of atmosphere, we use a camshaft
with incredible 0.632/0.632-inch lift and 254°/264° duration specifications.
Aluminum rectangular-port heads with 310cc intake passages
complement the airflow capability offered by the big-bore bottom end.
They also feature 118cc raised exhaust ports and 118cc combustion
chambers. The valves are big, too measuring 2.250 inches on the
intake side and 1.880 inches on the exhausts.
GM Performance Parts delivers the ZZ572/620 Deluxe with an 850-cfm
carburetor, HEI distributor, aluminum water pump and distinctive orange
powder-coated valve covers that proudly proclaim the 572 legend.
A legend in its own time. The LS7 is the standard engine in the Corvette Z06 and its 7.0L displacement (427 cubic inches) makes it the largest small block engine offered in a production car. Unlike LS... moreA legend in its own time. The LS7 is the standard engine in the Corvette Z06 and its 7.0L displacement (427 cubic inches) makes it the largest small block engine offered in a production car. Unlike LS1/LS6 engines, the LS7 uses a siamesebore cylinder block design - required for its big, 4.125-inch bores. Competition proven heads and lightweight components, such as titanium rods and intake valves, make the LS7 a street-tuned racing engine, with 505 horsepower. LS7 engines are built by hand at the GM Performance Build Center in Wixom, Mich.
Our baddest, most powerful Big-Block engine is ready for the strip!
A 10-second car is quick, but the ZZ572/720R could achieve that with a
couple of its spark plugs left in the pits. It is the king ... moreOur baddest, most powerful Big-Block engine is ready for the strip!
A 10-second car is quick, but the ZZ572/720R could achieve that with a
couple of its spark plugs left in the pits. It is the king of all Rat engines
and is capable of pulling your bracket racer or heads-up challenger down
the 1320 in the 9-second range.
The ZZ572/720Rs true value lies in its ready-to-run status when
delivered. Rather than waiting weeks for a racing engine shop to build
a custom combination, we deliver the ZZ572/720R fully assembled;
just bolt on the included Dominator-style 1150-cfm carburetor, along
with a starter and fuel pump (not included) and youre ready to go.
The ZZ572/720R is built with the best stuff we can find, including an
all-forged rotating assembly, rectangular-port aluminum cylinder heads
with 113cc intake ports and 2.25/1.88-inch valves. Theres also a solid
roller camshaft with 0.714/0.714-inch lift.
If youre building the ultimate dual-purpose car, the ZZ572/720R is
suitable for limited forays on the street. It has a 12.0:1 compression
ratio, so make sure youve got access to 110-octane gasoline before
hitting the local cruise night!
551 lb.-ft. @ 3,800 rpm 556 hp @ 6,100 rpm
More than 550 supercharged horse-power with exceptional refinement!
The Cadillac CTS-Vs 6.2L supercharged LSA engine delivers 556
horsepower with refinem... more551 lb.-ft. @ 3,800 rpm 556 hp @ 6,100 rpm
More than 550 supercharged horse-power with exceptional refinement!
The Cadillac CTS-Vs 6.2L supercharged LSA engine delivers 556
horsepower with refinement that is rare in the world of high
performance. It is smooth, quiet and well-balanced all while
delivering breathtaking power.
A unique aluminum cylinder block casting houses a forged steel
crankshaft and super-tough reciprocating parts, integrated piston-cooling
oil jets and high-flow cylinder heads that support the airflow enabled by
a 1.9L, sixth-generation supercharger with four-lobe, high-twist rotors.
The advanced rotor design broadens the superchargers effective range,
enhancing low-rpm torque and high-rpm horsepower.
GMPPs LSA 6.2L supercharged crate engine package comes fully
dressed, from the top of the charge-cooled supercharger assembly to
the ignition system, water pump, balancer and more. It is a less-costly
alternative to the LS9 engine and makes a great transplant for any off-
road LS-powered vehicle or pre-1979 car or truck. It also comes with
conventional wet-sump lubrication system.
The new LS9 6.2L superchargedthe standard engine in the 2009 Chevrolet Corvette ZR1is a technology marvel that holds the distinction of being the most powerful regular-production engine ever offered i... moreThe new LS9 6.2L superchargedthe standard engine in the 2009 Chevrolet Corvette ZR1is a technology marvel that holds the distinction of being the most powerful regular-production engine ever offered in a GM car.
It helps propel the 3,324-pound ZR1 from 0-60 in 3.4 seconds and through the quarter-mile in an astonishing 11.3 seconds at 131 mphall the way to a top speed of 205 mph!
Those stats make the ZR1 not only the most powerful car ever from GM, but the quickest and fastest, too!
GM Performance Parts is thrilled to offer the LS9 6.2L in a fully dressed crate engine package. And while it shares the 6.2L displacement of other LS engines, this one is unique, with stronger block casting, stronger cylinderhead castings and steel cylinder liners that are honed with a deck plate installed to maximize performance and cylinder sealing.
High-rpm-validated lightweight reciprocating parts, including titanium intake valves and connecting rods, are used along with high-flow cylinder heads that flow the charge forced on them by a sixth-generation supercharger.
A revised, higher-helix design delivers greater power at the low end and sustains it longer through the rpm band for broad, on-demand power whether off-idle or at speed.
